The Private BankerFriday, November 20, 2026

What Is VWAP? Volume Weighted Average Price, Anchored VWAP and Bands Explained

The Private Banker · Reference

What is VWAP?

How the volume weighted average price is calculated, what anchored VWAP and standard deviation bands add, and how traders and execution desks use it.

DefinitionVWAP (volume weighted average price) is the average price of all trades over a period, weighted by the number of shares or contracts traded at each price. It is calculated as the sum of price × volume divided by total volume, usually from the start of the trading session, and it tells you the average price that everyone who traded in that period paid or received.

Key facts
FormulaVWAP = Σ(price × volume) ÷ Σ(volume)
Default startThe session open; the calculation resets each session.
Anchored VWAPThe same calculation started from a bar or event the trader chooses.
BandsLines a set number of volume-weighted standard deviations above and below VWAP.
Main usesExecution benchmark for institutions; intraday reference for trend and value.

What VWAP measures

A simple average treats every price the same. VWAP gives more weight to prices where more volume traded, so it reflects where the bulk of the session’s business was actually done. If a stock or futures contract traded heavily at one level and only lightly at others, VWAP sits close to the heavily traded level.

Because it includes every trade since the start of the period, VWAP is a running benchmark: at any moment it shows the average price of all participants who have traded so far. That is why execution desks use it to judge fills and why intraday traders use it as a reference for who is in control.

How VWAP is calculated

VWAP = Σ (pricei × volumei) ÷ Σ volumei

Each trade (or each bar) contributes its price multiplied by its volume. The running total of price × volume is divided by the running total of volume. When the calculation uses bars instead of individual trades, many platforms use the bar’s typical price, (high + low + close) ÷ 3, as the price for the whole bar. Tick-by-tick data gives the exact value; bar-based data gives a close estimate that can differ slightly between chart timeframes.

Worked example (illustrative numbers):

TradePriceContractsPrice × volume
15,000.002001,000,000
25,004.00100500,400
35,008.00100500,800
Total4002,001,200

VWAP = 2,001,200 ÷ 400 = 5,003.00. The simple average of the three prices is 5,004.00; VWAP is lower because twice as many contracts traded at 5,000.00.

When VWAP starts and resets

A standard VWAP starts at the beginning of the session and resets at the next session. For stocks the session is clear: the regular exchange session. For futures that trade almost around the clock, such as CME’s E-mini S&P 500, traders choose between the full electronic session (which opens at 6:00 p.m. ET the evening before) and the regular session that matches the US stock market, 9:30 a.m. to 4:00 p.m. ET. The two give different VWAP values on the same day, so it matters which one a chart or a commentary uses.

Longer periods work the same way. A weekly VWAP starts at the week’s open, a monthly VWAP at the month’s open, and so on. Comparing several of them shows whether short-term and longer-term participants are in profit or loss on average. See VWAP Periods to Decipher Market Context.

Anchored VWAP

Anchored VWAP uses the same formula but starts the calculation at a point the trader chooses instead of the session open. Common anchors are a major high or low, an earnings release, a central bank decision, a gap, or the first day of a new trend. From that point on, the line shows the average price paid by everyone who has traded since the event.

The technique was popularised by Brian Shannon, who published Maximum Trading Gains With Anchored VWAP in 2023. Most charting platforms, including Sierra Chart, offer it as a drawing tool or study. See Anchor VWAP.

VWAP standard deviation bands

VWAP bands are lines plotted a set number of standard deviations above and below VWAP, typically at 1, 2 and 3. In the usual method the standard deviation is volume-weighted, with VWAP standing in for the mean:

σ = √( Σ volumei × (pricei − VWAP)² ÷ Σ volumei )
Upper band k = VWAP + k × σ    Lower band k = VWAP − k × σ

The bands widen when trade is spread over a wide range and stay narrow when trade is concentrated near VWAP. In a normal distribution about 68% of observations fall within one standard deviation and about 95% within two, but intraday prices are not normally distributed, so these percentages are a rough guide, not a rule. Platforms also offer other band methods, such as fixed offsets or a percentage of VWAP.

How traders use VWAP

As an execution benchmark. Institutional investors often measure a broker’s execution against the day’s VWAP: a buy order filled below VWAP, or a sell above it, is judged better than average. VWAP execution algorithms split a large order into smaller pieces in proportion to the volume expected through the day, aiming to finish close to the VWAP. Its use as a transaction-cost benchmark was described by Berkowitz, Logue and Noser in 1988.

As an intraday reference. Price holding above a rising VWAP shows that buyers have been willing to pay above the session’s average price; price holding below a falling VWAP shows the reverse. A flat VWAP with price rotating around it is typical of a balanced, two-sided session. Traders often watch how price reacts on returns to VWAP and to the bands.

As context across timeframes. Daily, weekly and monthly VWAPs, together with anchored VWAPs from important events, show where different groups of participants entered on average. See Volume Weighted Average Price (VWAP) and the VWAP Handbook.

Limitations

VWAP is a lagging measure: it describes trades that have already happened. Because it is cumulative, it moves less and less as the session goes on and late-day trade has little effect on it. It depends on reliable volume data, which is why it is most meaningful in centrally traded markets such as exchange-listed futures and stocks, and less so in decentralised markets such as spot foreign exchange. It also depends on the chosen start time, as described above.

VWAP, TWAP and moving averages

A TWAP (time weighted average price) gives every time interval the same weight regardless of volume; TWAP algorithms spread an order evenly over time. A moving average uses a rolling window of a fixed number of bars and ignores volume, while a standard VWAP is cumulative from a fixed start. See Professional Order Types and Moving Averages.

Frequently asked questions

What does VWAP stand for?

VWAP stands for volume weighted average price: the average price of all trades in a period, weighted by the volume traded at each price.

How is VWAP calculated?

VWAP is the sum of price multiplied by volume for every trade or bar, divided by the total volume, counted from the start of the period. Bar-based calculations often use the typical price (high + low + close) ÷ 3 for each bar.

Does VWAP reset every day?

A standard VWAP resets at the start of each session. Weekly, monthly and anchored VWAPs use longer or custom start points. For futures that trade nearly 24 hours, the value depends on whether the full electronic session or the regular session is used.

What is anchored VWAP?

Anchored VWAP is a VWAP whose calculation starts at a point the trader chooses, such as a major high or low or an earnings release, instead of at the session open. It shows the average price paid by everyone who traded since that event.

What are VWAP bands?

VWAP bands are lines a set number of volume-weighted standard deviations above and below VWAP, typically 1, 2 and 3. They show how far price has moved from the volume-weighted average relative to the session's dispersion.

What is the difference between VWAP and TWAP?

VWAP weights each price by the volume traded there. TWAP weights every time interval equally, regardless of volume.

Related lessons

This page is part of our reference library. The topics are covered in depth in our Trading Education curriculum:

The Sierra Chart templates we use in our research, with TPO, volume profile and VWAP studies already set up, are on the Chart Templates page.

Sources and further reading

  1. Sierra Chart: Volume Weighted Average Price (VWAP) study, documentation (band calculation methods)
  2. Sierra Chart: VWAP – Rolling with Standard Deviation Lines
  3. CME Group: E-mini S&P 500 futures contract specifications (trading hours)
  4. Brian Shannon, Maximum Trading Gains With Anchored VWAP (2023)
  5. Stephen A. Berkowitz, Dennis E. Logue and Eugene A. Noser, “The Total Cost of Transactions on the NYSE”, Journal of Finance 43(1), 1988

This page is for educational purposes only and does not constitute investment advice or a recommendation to buy or sell any financial instrument. Futures trading involves substantial risk of loss. Contract specifications can change; always check the exchange’s current specifications.

Last updated: 30 October 2026